Carbon materials with high pentagon density

Pentagons in carbon materials have attracted attentions because of the potential high chemical reactivity, band gap control, and electrochemical activity. However, it is challenging to prepare a carbon film with high pentagon density because of the curvature and the high reactivity caused by the presence of pentagons, and it is also challenging to estimate the percentage of pentagons in carbon materials because of the limitation of current analytical techniques. In this work, the percentage of pentagons in carbon materials was experimentally estimated for the first time using experimental and calculated C1s X-ray photoelectron spectroscopy and elemental analysis. Carbon films with 7% of pentagons (40% of pentagons compared to the raw material) with electrical resistivity of 1.1 × 104 Ω meter were prepared by heat treatment of corannulene at 873 K. On the other hand, fluoranthene and fullerene remained as non-film solid and powder without forming films at 873 K. Experimental and calculated Raman and IR spectra revealed the peaks of different types of pentagons. Decrement of pentagons in corannulene and fluoranthene heated at high temperatures can be explained mainly by the scission of C=C bond in pentagons, as suggested by the results of reactive molecular dynamics simulation (ReaxFF).