An Ultra-Low-Power Wideband Inductorless CMOS LNA With Tunable Active Shunt-Feedback

2016 
This work presents and analyzes the design of a 1-V ultra-low power, compact, and wideband low-noise amplifier (LNA). The proposed LNA uses common-gate (CG) NMOS and PMOS transistors as input devices in a complementary current-reuse structure. Low power input matching is achieved by employing an active shunt-feedback architecture while the current of the feedback stage is also reused by the input transistor to improve the current efficiency of the LNA. A forward body biasing (FBB) scheme is exploited to tune the feedback coefficient. The complementary characteristics of the input stage leads to partial second-order distortion cancellation. The proposed inductorless LNA is implemented in an IBM 0.13- $\mu {\text {m}}~1$ P8M CMOS technology and occupies only $0.0052~{\text {mm}}^{2}$ . The measured LNA has a 12.3-dB gain 4.9-dB minimum noise figure (NF) input referred third-order intercept point (IIP3) of −10 dBm and 0.1–-2.2 GHz bandwidth (BW), while consuming only 400 $\mu {\text {A}}$ from a 1-V supply.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    32
    References
    62
    Citations
    NaN
    KQI
    []