Caffeine and irgasan removal from water using bamboo, laurel and moringa residues impregnated with commercial TiO2 nanoparticles

The adsorption/degradation of caffeine and irgasan from aqueous artificial solutions by using.Lignocellulosic residues (LR) impregnated with TiO2 nanoparticles was studied. Three different LR were used: bamboo (Guadua angustifolia), laurel (Cordia allidora) and moringa (Moringa oleifera Lam.), each one with three nominal particle size ranges: 75–149, 45–75, and ≤45 μm. Commercially available TiO2 nanoparticles were added to these residues using the wet impregnation technique. The chemical composition of the LR was determined according to ASTM standards. FTIR spectroscopy and scanning electron microscopy were used to determine the functional groups and morphology of the modified materials, respectively. Adsorption/degradation tests were carried out in batch systems as a function of adsorbent concentration, contact time, nanoparticle content on the impregnated residues and light type influence. The maximum adsorption capacity was (37.1 mg. g-1/55.3 mg.g-1), using 40 wt.% nanoparticle-impregnated ≤45 μm laurel residues during 180 minutes, for a (7.0/0.7 g.L-1) concentration of (caffeine/irgasan). The caffeine adsorption isotherms were well described by the Langmuir and Freundlich models, while the Freundlich model describes irgasan adsorption. The use of UV radiation accelerated threefold the removal process.