A test card, also known as a test pattern or start-up/closedown test, is a television test signal, typically broadcast at times when the transmitter is active but no program is being broadcast (often at sign-on and sign-off). Used since the earliest TV broadcasts, test cards were originally physical cards at which a television camera was pointed, and such cards are still often used for calibration, alignment, and matching of cameras and camcorders. Test patterns used for calibrating or troubleshooting the downstream signal path are these days generated by test signal generators, which do not depend on the correct configuration (and presence) of a camera. Digitally generated cards allow vendors, viewers and television stations to adjust their equipment for optimal functionality. The audio broadcast while test cards are shown is typically a sine wave tone, radio (if associated or affiliated with the television channel) or music (usually instrumental, though some also broadcast with jazz or popular music). A test card, also known as a test pattern or start-up/closedown test, is a television test signal, typically broadcast at times when the transmitter is active but no program is being broadcast (often at sign-on and sign-off). Used since the earliest TV broadcasts, test cards were originally physical cards at which a television camera was pointed, and such cards are still often used for calibration, alignment, and matching of cameras and camcorders. Test patterns used for calibrating or troubleshooting the downstream signal path are these days generated by test signal generators, which do not depend on the correct configuration (and presence) of a camera. Digitally generated cards allow vendors, viewers and television stations to adjust their equipment for optimal functionality. The audio broadcast while test cards are shown is typically a sine wave tone, radio (if associated or affiliated with the television channel) or music (usually instrumental, though some also broadcast with jazz or popular music). Test cards typically contain a set of patterns to enable television cameras and receivers to be adjusted to show the picture correctly (See SMPTE color bars). Most modern test cards include a set of calibrated colour bars which will produce a characteristic pattern of 'dot landings' on a vectorscope, allowing chroma and tint to be precisely adjusted between generations of videotape or network feeds. SMPTE bars—and several other test cards—include analog black (a flat waveform at 7.5 IRE, or the NTSC setup level), full white (100 IRE), and a 'sub-black', or 'blacker-than-black' (at 0 IRE), which represents the lowest low-frequency transmission voltage permissible in NTSC broadcasts (though the negative excursions of the colourburst signal may go below 0 IRE). Between the colour bars and proper adjustment of brightness and contrast controls to the limits of perception of the first sub-black bar, an analogue receiver (or other equipment such as VTRs) can be adjusted to provide impressive fidelity.