Wave shoaling

In fluid dynamics, wave shoaling is the effect by which surface waves entering shallower water change in wave height. It is caused by the fact that the group velocity, which is also the wave-energy transport velocity, changes with water depth. Under stationary conditions, a decrease in transport speed must be compensated by an increase in energy density in order to maintain a constant energy flux. Shoaling waves will also exhibit a reduction in wavelength while the frequency remains constant. In fluid dynamics, wave shoaling is the effect by which surface waves entering shallower water change in wave height. It is caused by the fact that the group velocity, which is also the wave-energy transport velocity, changes with water depth. Under stationary conditions, a decrease in transport speed must be compensated by an increase in energy density in order to maintain a constant energy flux. Shoaling waves will also exhibit a reduction in wavelength while the frequency remains constant. In shallow water and parallel depth contours, non-breaking waves will increase in wave height as the wave packet enters shallower water. This is particularly evident for tsunamis as they wax in height when approaching a coastline, with devastating results. Waves nearing the coast change wave height through different effects. Some of the important wave processes are refraction, diffraction, reflection, wave breaking, wave–current interaction, friction, wave growth due to the wind, and wave shoaling. In the absence of the other effects, wave shoaling is the change of wave height that occurs solely due to changes in mean water depth – without changes in wave propagation direction and dissipation. Pure wave shoaling occurs for long-crested waves propagating perpendicular to the parallel depth contour lines of a mildly sloping sea-bed. Then the wave height H {displaystyle H} at a certain location can be expressed as: with K S {displaystyle K_{S}} the shoaling coefficient and H 0 {displaystyle H_{0}} the wave height in deep water. The shoaling coefficient K S {displaystyle K_{S}} depends on the local water depth h {displaystyle h} and the wave frequency f {displaystyle f} (or equivalently on h {displaystyle h} and the wave period T = 1 / f {displaystyle T=1/f} ). Deep water means that the waves are (hardly) affected by the sea bed, which occurs when the depth h {displaystyle h} is larger than about half the deep-water wavelength L 0 = g T 2 / ( 2 π ) . {displaystyle L_{0}=gT^{2}/(2pi ).} For non-breaking waves, the energy flux associated with the wave motion, which is the product of the wave energy density with the group velocity, between two wave rays is a conserved quantity (i.e. a constant when following the energy of a wave packet from one location to another). Under stationary conditions the total energy transport must be constant along the wave ray – as first shown by William Burnside in 1915.For waves affected by refraction and shoaling (i.e. within the geometric optics approximation), the rate of change of the wave energy transport is: where s {displaystyle s} is the co-ordinate along the wave ray and b c g E {displaystyle bc_{g}E} is the energy flux per unit crest length. A decrease in group speed c g {displaystyle c_{g}} and distance between the wave rays b {displaystyle b} must be compensated by an increase in energy density E {displaystyle E} . This can be formulated as a shoaling coefficient relative to the wave height in deep water. For shallow water, when the wavelength is much larger than the water depth – in case of a constant ray distance b {displaystyle b} (i.e. perpendicular wave incidence on a coast with parallel depth contours) – wave shoaling satisfies Green's law: with h {displaystyle h} the mean water depth, H {displaystyle H} the wave height and h 4 {displaystyle {sqrt{h}}} the fourth root of h . {displaystyle h.} Following Phillips (1977) and Mei (1989), denote the phase of a wave ray as