Booster pump

A booster pump is a machine which will increase the pressure of a fluid. They may be used with liquids or gases, but the construction details will vary depending on the fluid.A gas booster is similar to a gas compressor, but generally a simpler mechanism which often has only a single stage of compression, and is used to increase pressure of a gas already above ambient pressure. Two-stage boosters are also made.Boosters may be used for increasing gas pressure, transferring high pressure gas, charging gas cylinders and scavenging. A booster pump is a machine which will increase the pressure of a fluid. They may be used with liquids or gases, but the construction details will vary depending on the fluid.A gas booster is similar to a gas compressor, but generally a simpler mechanism which often has only a single stage of compression, and is used to increase pressure of a gas already above ambient pressure. Two-stage boosters are also made.Boosters may be used for increasing gas pressure, transferring high pressure gas, charging gas cylinders and scavenging. On new construction and retrofit projects, water pressure booster pumps are used to provide adequate water pressure to upper floors of high rise buildings. The need for a water pressure booster pump can also arise after the installation of a backflow prevention device (BFP), which is currently mandated in many municipalities to protect the public water supplies from contaminants within a building entering the public water supply. The use of BFPs began after The Clean Water Act was passed. These devices can cause a loss of 12 PSI, and can cause flushometers on upper floors not to work properly.After pipes have been in service for an extended period, scale can build up on the inside surfaces which will cause a pressure drop when the water flows. Booster pumps are usually piston or plunger type compressors. A single-acting, single-stage booster is the simplest configuration, and comprises a cylinder, designed to withstand the operating pressures, with a piston which is driven back and forth inside the cylinder. The cylinder head is fitted with supply and discharge ports, to which the supply and discharge hoses or pipes are connected, with a non-return valve on each, constraining flow in one direction from supply to discharge. When the booster is inactive, and the piston is stationary, gas will flow from the inlet hose, through the inlet valve into the space between the cylinder head and the piston. If the pressure in the outlet hose is lower, it will then flow out and to whatever the outlet hose is connected to. This flow will stop when the pressure is equalized, taking valve opening pressures into account.