Shortwave

Shortwave radio is radio transmission using shortwave radio frequencies. There is no official definition of the band, but the range always includes all of the high frequency band (HF), and generally extends from 3–30 MHz (10 to 100 metres); above the medium frequency band (MF), to the end of the HF band.ELF 3 Hz/100 Mm 30 Hz/10 MmSLF 30 Hz/10 Mm 300 Hz/1 MmULF 300 Hz/1 Mm 3 kHz/100 kmVLF 3 kHz/100 km 30 kHz/10 kmLF 30 kHz/10 km 300 kHz/1 kmMF 300 kHz/1 km 3 MHz/100 mHF 3 MHz/100 m 30 MHz/10 mVHF 30 MHz/10 m 300 MHz/1 mUHF 300 MHz/1 m 3 GHz/100 mmSHF 3 GHz/100 mm 30 GHz/10 mmEHF 30 GHz/10 mm 300 GHz/1 mmTHF 300 GHz/1 mm 3 THz/0.1 mm Shortwave radio is radio transmission using shortwave radio frequencies. There is no official definition of the band, but the range always includes all of the high frequency band (HF), and generally extends from 3–30 MHz (10 to 100 metres); above the medium frequency band (MF), to the end of the HF band. Radio waves in the shortwave band can be reflected or refracted from a layer of electrically charged atoms in the atmosphere called the ionosphere. Therefore, short waves directed at an angle into the sky can be reflected back to Earth at great distances, beyond the horizon. This is called skywave or 'skip' propagation. Thus shortwave radio can be used for very long distance communication, in contrast to radio waves of higher frequency which travel in straight lines (line-of-sight propagation) and are limited by the visual horizon, about 64 km (40 miles). Shortwave radio is used for broadcasting of voice and music to shortwave listeners over very large areas; sometimes entire continents or beyond. It is also used for military over-the-horizon radar, diplomatic communication, and two-way international communication by amateur radio enthusiasts for hobby, educational and emergency purposes, as well as for long distance aviation and marine communications. The name 'shortwave' originated during the early days of radio in the early 20th century, when the radio spectrum was considered divided into long wave (LW), medium wave (MW) and short wave bands based on the wavelength of the radio waves. Shortwave radio received its name because the wavelengths in this band are relatively shorter than 200 m (1,500 kHz) which marked the original upper limit of the medium frequency band first used for radio communications. The broadcast medium wave band now extends above the 200 m/1,500 kHz limit. Early long distance radio telegraphy used long waves, below 300 kilohertz (kHz). The drawbacks to this system included a very limited spectrum available for long distance communication, and the very expensive transmitters, receivers and gigantic antennas that were required. It was also difficult to beam the radio wave directionally with long wave, resulting in a major loss of power over long distances. Prior to the 1920s, the shortwave frequencies above 1.5 MHz were regarded as useless for long distance communication and were designated in many countries for amateur use. Guglielmo Marconi, pioneer of radio, commissioned his assistant Charles Samuel Franklin to carry out a large scale study into the transmission characteristics of short wavelength waves and to determine their suitability for long distance transmissions. Franklin rigged up a large antenna at Poldhu Wireless Station, Cornwall, running on 25 kW of power. In June and July 1923, wireless transmissions were completed during nights on 97 meters from Poldhu to Marconi's yacht Elettra in the Cape Verde Islands. In September 1924, Marconi transmitted daytime and nighttime on 32 meters from Poldhu to his yacht in Beirut. Franklin went on to refine the directional transmission, by inventing the curtain array aerial system. In July 1924, Marconi entered into contracts with the British General Post Office (GPO) to install high speed shortwave telegraphy circuits from London to Australia, India, South Africa and Canada as the main element of the Imperial Wireless Chain. The UK-to-Canada shortwave 'Beam Wireless Service' went into commercial operation on 25 October 1926. Beam Wireless Services from the UK to Australia, South Africa and India went into service in 1927. Shortwave communications began to grow rapidly in the 1920s, similar to the internet in the late 20th century. By 1928, more than half of long distance communications had moved from transoceanic cables and longwave wireless services to shortwave and the overall volume of transoceanic shortwave communications had vastly increased. Shortwave stations had cost and efficiency advantages over massive longwave wireless installations, however some commercial longwave communications stations remained in use until the 1960s. Long distance radio circuits also reduced the need for new cables, although the cables maintained their advantages of high security and a much more reliable and better quality signal than shortwave. The cable companies began to lose large sums of money in 1927, and a serious financial crisis threatened the viability of cable companies that were vital to strategic British interests. The British government convened the Imperial Wireless and Cable Conference in 1928 'to examine the situation that had arisen as a result of the competition of Beam Wireless with the Cable Services'. It recommended and received Government approval for all overseas cable and wireless resources of the Empire to be merged into one system controlled by a newly formed company in 1929, Imperial and International Communications Ltd. The name of the company was changed to Cable and Wireless Ltd. in 1934.