Routing in the PSTN is the process used to route telephone calls across the public switched telephone network. Routing in the PSTN is the process used to route telephone calls across the public switched telephone network. Telephone calls are routed across a network of potentially many switching systems, often owned by different telephone carriers. Switching systems are connected with trunks. Each switch may have many neighbors. Neighboring switches owned by different operators are connected at interconnect points. The PSTN is not a full mesh network with the nodes of every operator directly connected to those of every other, which would be impractical and inefficient. Therefore, calls may be routed through intermediate operator networks before they reach their final destination. Efficient least-cost routing is an important procedure in PSTN routing. Each time a call is placed for routing, the destination number (also known as the called party) is entered by the calling party into their terminal. The destination number generally has two parts, a prefix which generally identifies the geographical location of the destination telephone, and a number unique within that prefix that determines the specific destination terminal. Sometimes if the call is between two terminals in the same local area (that is, both terminals are on the same telephone exchange), then the prefix may be omitted.