O transtorno gerado pelos resíduos provenientes das redes de esgoto doméstico e da produção animal é um grande problema no contexto atual. Aliar sistemas eficientes que possam garantir o desenvolvimento e ainda preservar o meio tem sido o propósito das ações de pesquisadores para garantir a sustentabilidade ambiental. O objetivo foi avaliar a eficiência do sistema de biodigestão anaeróbia de águas residuárias humanas, no processo redução dos micro-organismos indicadores de contaminação fecal (coliformes totais e coliformes termotolerantes), visando a utilização do efluente como adubo de solo para pastagem. As amostras foram colhidas semanalmente durante 4 meses, totalizando 108 amostras de afluente do biodigestor tubular e lagoa de estabilização. As análises foram realizadas por meio da técnica de tubos múltiplos (APHA; AWWA; WEF, 2005), no Laboratório de Biomassa I do Departamento de Engenharia Rural pertencentes à FCAV/UNESP, Câmpus de Jaboticabal. Ao analisar o sistema de biodigestão anaeróbia, desde a entrada do esgoto (afluente) até o ponto final, após o tratamento (lagoa), observou-se eficiência de remoção de 98,75% para coliformes totais (CTot) e para os coliformes termotolerantes (CTer) de 99,26%. Portanto, os pontos de coleta no afluente e lagoa diferiram estatisticamente pelo teste de Tukey ao nível de 5% de probabilidade. Embora o sistema de tratamento tenha atingido boa eficiência de remoção, os parâmetros obtidos para CTot (1,88E+04 NMP mL-1), e para CTer (1,48E+04 NMP mL-1) não atingiram os padrões pré estabelecidos na Resolução CONAMA 357 (BRASIL, 2005), os quais não poderão ser utilizadas para irrigação de forrageiras. PALAVRAS-CHAVE: ESGOTO SANITÁRIO. FERTILIZANTE. MICRO-ORGANISMOS INDICADORES. SUSTENTABILIDADE AMBIENTAL. AGRADECIMENTOS: Cnpq e Copercana ÁREA TEMÁTICA: Saúde Pública
Abstract Long-term cement sheath integrity is important to maintain wellbore stability and effective zonal isolation. Various factors influence cement sheath integrity, such as effective placement of cement, mechanical and thermal stresses, and interaction with corrosive gases. Corrosive gases are known to chemically attack Portland cement. However, the challenge is designing a cement system that can sustain CO2 and H2S attack. Acid-gas-resistant systems are useful in various applications, including producers and CO2 injector wells. To understand how the cement sheath is affected by prolonged exposure to corrosive gases, detailed studies should be performed at different temperatures and pressure conditions. This paper documents a resilient cement system that was exposed to CO2 and H2S gas environments for a period of three months. For comparison purposes, a neat cement system was used as a reference and tests were conducted at 194 (90°C) and 284°F (140°C). X-ray density profiles obtained using tomography techniques were used to analyze samples. The cement samples responded differently to CO2 and H2S environments. Formation of CaCO3 on exposure to CO2 was evident and was reflected in X-ray density profiles. Conversely, leaching of neat cement was observed on exposure to H2S gas. In both cases, the resilient cement system specially designed for the work described proved to be a better option when compared to neat cement because the destruction was less prominent in the former case.
Graft copolymerization induced by gamma radiation has being used as a tool to modify the surface properties of a range of polymeric substrates. This work describes the use of this technique for the grafting of 2-hydroxyethyl methacrylate (HEMA) branches onto low-density polyethylene (LDPE) surface, in order to improve its hydrophilic properties. Sample preparation protocols were selected from previous work in order to obtain films with high grafting yields. The obtained PE-g-HEMA films were characterized by thermal analysis techniques (DSC and TGA), and by Fourier transform infrared spectroscopy (FTIR). The results obtained show that, upon irradiation, there is some loss of cristalinity of the copolymer backbone, but also that the samples keep a good thermal stability. The water uptake of the samples was evaluated. Hydration levels up to near 95 % with a ydration/dehydration average ratio of 1:5 were obtained.
Old manuscripts are among the most important elements of the cultural and historical heritage of ancient knowledge. Unfortunately, many of them suffer from degradation, mostly those written with iron gall inks. In the present work, a study using non-destructive techniques was designed with the aim of analyzing the elemental composition and structural characteristics of iron gall inks, reproduced in laboratory, paper and their interaction when the ink is deposited on paper, inducing the paper degradation. Proton induced X-ray emission, X-ray diffraction and Fourier-transform infrared spectroscopy provided the elemental and structural information, and photography under infrared (IR) and ultraviolet (UV) light allowed the differentiation between manufactured inks. Results show that the first step of inked paper deterioration is due to acid-hydrolysis of the cellulose and the presence of reactive Fe(II) species by reducing the crystallinity index of the paper, which is affected depending on the ink recipe and the starting raw materials. These results will be useful to future studies on ancient documents written with iron gall inks, which suffer deterioration due to ink corrosion, and to differentiate between the different paper degradation mechanisms.
It has increasingly been recognized that electrical currents play a pivotal role in cell migration and tissue repair, in a process named "galvanotaxis". In this review, we summarize the current evidence supporting the potential benefits of electric stimulation (ES) in the physiology of peripheral nerve repair (PNR). Moreover, we discuss the potential of piezoelectric materials in this context. The use of these materials has deserved great attention, as the movement of the body or of the external environment can be used to power internally the electrical properties of devices used for providing ES or acting as sensory receptors in artificial skin (e-skin). The fact that organic materials sustain spontaneous degradation inside the body means their piezoelectric effect is limited in duration. In the case of PNR, this is not necessarily problematic, as ES is only required during the regeneration period. Arguably, piezoelectric materials have the potential to revolutionize PNR with new biomedical devices that range from scaffolds and nerve-guiding conduits to sensory or efferent components of e-skin. However, much remains to be learned regarding piezoelectric materials, their use in manufacturing of biomedical devices, and their sterilization process, to fine-tune their safe, effective, and predictable in vivo application.
'/%3e%3c/g%3e%3cuse xlink:href='%23d' x='45.714'/%3e%3cuse xlink:href='%23e' transform='matrix(-1 0 0 1 479.792 0)'/%3e%3cg id='f' fill='%23fff'%3e%3cpath fill='%23039' d='M232.636 202.406v.005c0 2.212.85 4.227 2.212 5.69 1.365 1.466 3.245 2.377 5.302 2.377 2.067 0 3.944-.905 5.303-2.365 1.358-1.459 2.202-3.472 2.202-5.693v-10.768l-14.992-.013-.028 10.766'/%3e%3ccircle cx='236.074' cy='195.735' r='1.486'/%3e%3ccircle cx='244.392' cy='195.742' r='1.486'/%3e%3ccircle cx='240.225' cy='199.735' r='1.486'/%3e%3ccircle cx='236.074' cy='203.916' r='1.486'/%3e%3ccircle cx='244.383' cy='203.905' r='1.486'/%3e%3c/g%3e%3cuse xlink:href='%23f' y='-26.016'/%3e%3cuse xlink:href='%23f' x='-20.799'/%3e%3cuse xlink:href='%23f' x='20.745'/%3e%3cuse xlink:href='%23f' y='25.784'/%3e%3c/svg%3e)
