Semiconductor spin qubits have gained increasing attention as a possible platform to host a fault-tolerant quantum computer. First demonstrations of spin qubit arrays have been shown in a wide variety of semiconductor materials. The highest performance for spin qubit logic has been realized in silicon, but scaling silicon quantum dot arrays in two dimensions has proven to be challenging. By taking advantage of high-quality heterostructures and carefully designed gate patterns, we are able to form a tunnel coupled 2 $\times$ 2 quantum dot array in a $^{28}$Si/SiGe heterostructure. We are able to load a single electron in all four quantum dots, thus reaching the (1,1,1,1) charge state. Furthermore we characterise and control the tunnel coupling between all pairs of dots by measuring polarisation lines over a wide range of barrier gate voltages. Tunnel couplings can be tuned from about $30~\rm \mu eV$ up to approximately $400~\rm \mu eV$. These experiments provide a first step toward the operation of spin qubits in $^{28}$Si/SiGe quantum dots in two dimensions.
Scalable quantum processors require high-fidelity universal quantum logic operations in a manufacturable physical platform. Donors in silicon provide atomic size, excellent quantum coherence and compatibility with standard semiconductor processing, but no entanglement between donor-bound electron spins has been demonstrated to date. Here we present the experimental demonstration and tomography of universal 1- and 2-qubit gates in a system of two weakly exchange-coupled electrons, bound to single phosphorus donors introduced in silicon by ion implantation. We surprisingly observe that the exchange interaction has no effect on the qubit coherence. We quantify the fidelity of the quantum operations using gate set tomography (GST), and we use the universal gate set to create entangled Bell states of the electrons spins, with fidelity ~ 93%, and concurrence 0.91 +/- 0.08. These results form the necessary basis for scaling up donor-based quantum computers.
Raw data and analysis scripts to reproduce the analysis for the figures of the paper "Shuttling an electron spin through a silicon quantum dot array". Analysis scripts are written in python and require the package QCoDeS. Zwerver, A.M.J., et al. ArXiv:2209.000920v2
In this work, we present the experimental results of a new wafer-level production platform for aluminum nitride based piezoelectric micromachined ultrasonic transducers (PMUTs), operated by lower than 10 V peak-to-peak signals, and covering ultrasonic frequency ranges from 200 kHz up to 10 MHz, with measured axial displacements ranging from a few nanometers up to 600 nm. The fabricated devices have a low footprint of (130x130) μm2. The experimental results are in excellent agreement with finite-element method simulations. The small footprint and driving voltages of these piezo-microactuators are well suited for the development of micropump and micromixer designs for portable microfluidics applications.
As spin-based quantum processors grow in size and complexity, maintaining high fidelities and minimizing crosstalk will be essential for the successful implementation of quantum algorithms and error-correction protocols. In particular, recent experiments have highlighted pernicious transient qubit frequency shifts associated with microwave qubit driving. Workarounds for small devices, including prepulsing with an off-resonant microwave burst to bring a device to a steady-state, wait times prior to measurement, and qubit-specific calibrations all bode ill for device scalability. Here, we make substantial progress in understanding and overcoming this effect. We report a surprising non-monotonic relation between mixing chamber temperature and spin Larmor frequency which is consistent with observed frequency shifts induced by microwave and baseband control signals. We find that purposefully operating the device at 200 mK greatly suppresses the adverse heating effect while not compromising qubit coherence or single-qubit fidelity benchmarks. Furthermore, systematic non-Markovian crosstalk is greatly reduced. Our results provide a straightforward means of improving the quality of multi-spin control while simplifying calibration procedures for future spin-based quantum processors.
This dataset contains raw current traces acquired during the measurements of the nuclear flipping due to the ionisation shock. Matlab scripts appended to the data allow for the reanalysis of the data to recreate figures in the paper.
Magnetic fields are a standard tool in the toolbox of every physicist and are required for the characterization of materials, as well as the polarization of spins in nuclear magnetic resonance or electron paramagnetic resonance experiments. Quite often, a static magnetic field of sufficiently large, but fixed, magnitude is suitable for these tasks. Here, we present a permanent magnet assembly that can achieve magnetic field strengths of up to 1.5 T over an air gap length of 7 mm. The assembly is based on a Halbach array of neodymium magnets, with the inclusion of the soft magnetic material Supermendur to boost the magnetic field strength inside the air gap. We present the design, simulation, and characterization of the permanent magnet assembly, measuring an outstanding magnetic field stability with a drift rate of |D| < 2.8 ppb/h. Our measurements demonstrate that this assembly can be used for spin qubit experiments inside a dilution refrigerator, successfully replacing the more expensive and bulky superconducting solenoids.
'/%3e%3c/defs%3e%3cpath fill='%23012169' d='M0 0h10080v5040H0z'/%3e%3cpath stroke='%23fff' stroke-width='.6' d='m0 0 6 3m0-3L0 3' clip-path='url(%23b)' transform='scale(840)'/%3e%3cpath stroke='%23e4002b' stroke-width='.4' d='m0 0 6 3m0-3L0 3' clip-path='url(%23c)' transform='scale(840)'/%3e%3cpath stroke='%23fff' stroke-width='840' d='M2520 0v2520M0 1260h5040'/%3e%3cpath stroke='%23e4002b' stroke-width='504' d='M2520 0v2520M0 1260h5040'/%3e%3cg fill='%23fff'%3e%3cuse xlink:href='%23d' x='2520' y='3780'/%3e%3cuse xlink:href='%23a' x='7560' y='4200'/%3e%3cuse xlink:href='%23a' x='6300' y='2205'/%3e%3cuse xlink:href='%23a' x='7560' y='840'/%3e%3cuse xlink:href='%23a' x='8680' y='1869'/%3e%3cuse xlink:href='%23e' x='8064' y='2730'/%3e%3c/g%3e%3c/svg%3e)