Abstract Background The direct bioconversion of crude glycerol, a byproduct of biodiesel production, into 1,3-propanediol by microbial fermentation constitutes a remarkably promising value-added applications. However, the low activity of glycerol dehydratase, which is the key and rate-limiting enzyme in the 1,3-propanediol synthetic pathway, caused by crude glycerol impurities is one of the main factors affecting the 1,3-propanediol yield. Hence, the exploration of glycerol dehydratase resources suitable for crude glycerol bioconversion is required for the development of 1,3-propanediol-producing engineered strains. Results In this study, the novel glycerol dehydratase 2eGDHt, which has a tolerance against crude glycerol impurities from Klebsiella pneumoniae 2e, was characterized. The 2eGDHt exhibited the highest activity toward glycerol, with K m and V m values of 3.42 mM and 58.15 nkat mg −1 , respectively. The optimum pH and temperature for 2eGDHt were 7.0 and 37 °C, respectively. 2eGDHt displayed broader pH stability than other reported glycerol dehydratases. Its enzymatic activity was increased by Fe 2+ and Tween-20, with 294% and 290% relative activities, respectively. The presence of various concentrations of the crude glycerol impurities, including NaCl, methanol, oleic acid, and linoleic acid, showed limited impact on the 2eGDHt activity. In addition, the enzyme activity was almost unaffected by the presence of an impurity mixture that mimicked the crude glycerol environment. Structural analyses revealed that 2eGDHt possesses more coil structures than reported glycerol dehydratases. Moreover, molecular dynamics simulations and site-directed mutagenesis analyses implied that the existence of unique Val744 from one of the increased coil regions played a key role in the tolerance characteristic by increasing the protein flexibility. Conclusions This study provides insight into the mechanism for enzymatic action and the tolerance against crude glycerol impurities, of a novel glycerol dehydratase 2eGDHt, which is a promising glycerol dehydratase candidate for biotechnological conversion of crude glycerol into 1,3-PDO.
Abstract Currently, the realization of controllable Li electrodeposits to further extend the cycling life of Li metal anode remains challenging. Herein, it is reported that carbon nanosheet array‐loaded ferromagnetic CoF 2 nanoparticles on carbon cloth (CC@CoF 2 /C) as an internal micro‐magnetic field source to manipulate the dynamic trajectory of Li + deposition via the magnetohydrodynamic effect. This approach ensures uniform lithium‐ion distribution and improves deep plating capacity, achieving a prolonged cycle life of the dendrite‐free Li anode. Finite element simulations, in situ characterizations, and electrochemical tests confirm that magnetic CoF 2 not only guides Li + migration through Lorentz force to prevent dendritic growth but also improves uniform Li deposition due to the in situ conversion of LiF‐rich solid electrolyte interphase during electroplating. Meanwhile, a CC@CoF 2 /C‐based half‐cell operates stably over 10 000 h at 1 mA cm −2 with a low 7.8 mV overpotential. When matched with a commercial LiFePO 4 cathode, the full cell reveals a high capacity of 122.96 mAh g −1 at a 2 C rate after 1000 cycles, retaining 91.95% capacity. The proposed strategy can be effectively expanded and adapted to investigate the deposition behavior of a wide range of metal anodes, offering a versatile and robust analytical framework for addressing diverse metal‐based electrochemical systems.
Exploring microorganisms especially bacteria associated with the degradation of lignocellulosic biomass shows great potentials in biofuels production. The rice endophytic bacterium Pantoea ananatis Sd-1 with strong lignocellulose degradation capacity has been reported in our previous study. However, a comprehensive analysis of its corresponding degradative system has not yet been conducted. The aim of this work is to identify and characterize the lignocellulolytic enzymes of the bacterium to understand its mechanism of lignocellulose degradation and facilitate its application in sustainable energy production. The genomic analysis revealed that there are 154 genes encoding putative carbohydrate-active enzymes (CAZy) in P. ananatis Sd-1. This number is higher than that of compared cellulolytic and ligninolytic bacteria as well as other eight P. ananatis strains. The CAZy in P. ananatis Sd-1 contains a complete repertoire of enzymes required for cellulose and hemicellulose degradation. In addition, P. ananatis Sd-1 also possesses plenty of genes encoding potential ligninolytic relevant enzymes, such as multicopper oxidase, catalase/hydroperoxidase, glutathione S-transferase, and quinone oxidoreductase. Quantitative real-time PCR analysis of parts of genes encoding lignocellulolytic enzymes revealed that they were significantly up-regulated (at least P < 0.05) in presence of rice straw. Further identification of secretome of P. ananatis Sd-1 by nano liquid chromatography–tandem mass spectrometry confirmed that considerable amounts of proteins involved in lignocellulose degradation were only detected in rice straw cultures. Rice straw saccharification levels by the secretome of P. ananatis Sd-1 reached 129.11 ± 2.7 mg/gds. Correspondingly, the assay of several lignocellulolytic enzymes including endoglucanase, exoglucanase, β-glucosidase, xylanase-like, lignin peroxidase-like, and laccase-like activities showed that these enzymes were more active in rice straw relative to glucose substrates. The high enzymes activities were not attributed to bacterial cell densities but to the difference of secreted protein contents. Our results indicate that P. ananatis Sd-1 can produce considerable lignocellulolytic enzymes including cellulases, hemicellulases, and ligninolytic relevant enzymes. The high activities of those enzymes could be efficiently induced by lignocellulosic biomass. This identified degradative system is valuable for the lignocellulosic bioenergy industry.
Abstract Background Pretreatment is a critical step required for efficient conversion of woody biomass into biofuels and platform chemicals. Fungal pretreatment is regarded as one of the most promising technology for woody biomass conversion but remains challenging for industrial application. The exploration of potential fungus strain with high efficient delignification and less processing time for woody biomass pretreatment will be valuable for development of biorefinery industry. Here, a newly isolated white-rot basidiomycete Peniophora incarnate T-7 was employed for poplar wood pretreatment. Results The chemical component analysis showed that cellulose, hemicellulose and lignin from poplar wood declined by 16%, 48% and 70%, respectively, after 7 days submerged fermentation by P . incarnate T-7. Enzymatic saccharification analysis revealed that the maximum yields of glucose and xylose from 7 days of P . incarnate T-7 treated poplar wood reached 33.4% and 27.6%, respectively, both of which were enhanced by sevenfold relative to the untreated group. Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffraction (XRD) and pyrolysis gas chromatography–mass spectrometry (Py-GC/MS) characterization confirmed that lignocellulosic structure of poplar wood was largely broken by P . incarnate T-7, including delignification and de-crystalline of cellulose. Meanwhile, lignin component of poplar wood was selectively degraded by P . incarnate T-7, and G-type unit of lignin was preferentially attacked by the strain. Furthermore, quantitative proteomic analysis revealed that a considerable amount of lignocellulolytic enzymes were detected in the secretory proteins of P . incarnate T-7, especially with high abundance of lignin-degrading enzymes and hemicellulases. Combination of quantitative proteomic with transcriptomic analysis results showed that most of those lignocellulolytic enzymes were highly upregulated on poplar wood substrate compared to glucose substrate. Conclusions This study showed that P . incarnate T-7 could selectively delignify poplar wood by submerged fermentation with short time of 7 days, which greatly improved its enzymatic saccharification efficiency. Our results suggested that P . incarnate T-7 might be a promising candidate for industrial woody biomass pretreatment.
'/%3e%3cuse xlink:href='%23a' transform='rotate(23.036 .093 25.536)'/%3e%3cuse xlink:href='%23a' transform='rotate(45.87 1.273 16.18)'/%3e%3cuse xlink:href='%23a' transform='rotate(69.945 .996 12.078)'/%3e%3cuse xlink:href='%23a' transform='rotate(20.66 -19.689 31.932)'/%3e%3c/svg%3e)