PURPOSES : The main purpose of this study is suggest of field bond strength evaluation method for more objective evaluation method through Evaluation of Bond Strength Properties with changing aspect ratio and temperature. METHODS : The evaluation is laboratory bond strength test. Using the core machine, the pull-off test method ; the bond strength test of interface layer the universal testing machine. RESULTS: As a result of the laboratory bond strength evaluation, it was verified that the bond strength by aspect ratio decreases linearly with increasing aspect ratio and the bond strength properties by temperature change existed at high and low temperature condition relative to odinary temperature condition. CONCLUSIONS: According to the results of laboratory bond strength evaluation, the field bond strength evaluation results suggest applying the proposed correction factor (0.8, 1.0, 1.4, 1.9) according to aspect ratio(0.5, 0.1, 1.5, 2.0), For more objective evaluation of the bond strength, it is analyzed that the evaluation value is within 6 ~ 32℃ and the result can be obtained within 5% of the coefficient of variation.
A shot blasting process is to improve the surface quality of stainless steels. The process is similar to a well-known shot peening that is used to strengthen the surface via the residual stress. In the shot blasting process, it is important to decide many parameters, such as the size, incident angle and velocity of shot balls, to effectively get rid of the iron oxide on the surface of stainless steels. In this study, the simulation of the shot blasting process is carried out by a finite element software, which can help to find out the optimal design parameters to cause the delamination of the iron oxide from the stainless steel substrate. The results obtained are also compared to those of the discrete element method to verify them.
There are numerous crashed deaths or near-miss accidents in everywhere. The outbreak place is not just developing countries such as India and Iran, but also leading countries including Japan and German. The crashed death of pedestrian seems to be an unavoidable accident. However, it was revealed in social psychology field that the accident can be treated as a kind of physical phenomenon. In this study, we apply discrete element method frequently used in the field of two-phase flow to pedestrian flow with collective behavior psychology. This approachis a field of social science and physics, called computational sociology. The acquired results show that emergency exit size can be related with the wall slope of the exit.
Performance evaluation of a compressor is conducted to develop 500W class ultra-micro gas turbine (UMGT) for power generation. The performance evaluation is essential to check the performance of the components of UMGT, a radial turbine, a centrifugal compressor, an angular combustor and a shaft, which have been already designed in previous researches. The purpose of this study is to introduce the development process of the performance testing equipments of the UMGT and to present the results of compressor performance test. For the performance evaluation of the compressor, two test equipments are developed and the initial test equipment uses commercial static air bearings with long shaft. In the improved test equipment, static air bearing is improved to increase rotating speed and compressed nitrogen gas is used for utility gas of the static air bearing to supply compressed air in a stable and steady way. To increase rotating speed to 320,000 rpm, 80% speed of design speed, compressed air is provided to the turbine. The performance map of the compressor with the 50%, 60%, 70%, 80% speed of design point is presented. The results of the performance test of compressor show a good agreement with the results of 3D CFD.
송전선로에 절연물로 사용되는 애자는 설치 이후 장시간 사용에 따라 고전압 스트레스, 기계적 스트레스, 열 및 환경 스트레스 등으로 열화가 진행되기 때문에 안정적인 전력설비 운영을 위하여 활선 애자의 비파괴 열화 상태 점검이 필요하다. 본 연구에서는 비파괴 상태 진단 감시 기술인 주파수 응답 함수 측정을 통한 고유 진동수 분석을 통하여 현재 활선 애자로 사용되고 있는 NGK210, KRI210, NGK300 및 KRI300 4가지 종류 애자의 동특성 실험을 수행하였으며, 이를 통하여 애자의 결함이 발생하였을 때 고유진동수 변화를 분석하였다.
'%3e%3cg id='b'%3e%3cpath id='a' stroke='%23000' stroke-width='2' d='M-6-25H6m-12 3H6m-12 3H6'/%3e%3cuse xlink:href='%23a' y='44'/%3e%3c/g%3e%3cpath stroke='%23fff' d='M0 17v10'/%3e%3ccircle r='12' fill='%23cd2e3a'/%3e%3cpath fill='%230047a0' d='M0-12A6 6 0 0 0 0 0a6 6 0 0 1 0 12 12 12 0 0 1 0-24z'/%3e%3c/g%3e%3cg transform='rotate(-123.69)'%3e%3cuse xlink:href='%23b'/%3e%3cpath stroke='%23fff' d='M0-23.5v3M0 17v3.5m0 3v3'/%3e%3c/g%3e%3c/svg%3e)