Post mortem analysis shows that mid and high atomic number metallic impurities are present in deposits on JET plasma facing components with the highest amount of Ni and W, and therefore the largest sink, being found at the top of the inner divertor. Sources are defined as "continuous" or "specific", in that "continuous" sources arise from ongoing erosion from plasma facing surfaces and "specific" are linked with specific events which decrease over time until they no longer act as a source. This contribution evaluates the sinks and estimates sources, and the balance gives an indication of the dominating processes. Charge exchange neutral erosion is found to be the main source of nickel, whereas erosion of divertor plasma facing components is the main source of tungsten. Specific sources are shown to have little influence over the global mid- and high-Z impurity concentrations in deposits.

Deposition

10.1016/j.nme.2018.12.024

Cite

Citations (29)

Overview of T and D-T results in JET with ITER-like Wall

Nuclear Fusion (2024)

C. F. Maggi Domenico Abate N. Abid P. Abreu O. Adabonyan

Abstract In 2021 JET exploited its unique capabilities to operate with T and D–T fuel with an ITER-like Be/W wall (JET-ILW). This second major JET D–T campaign (DTE2), after DTE1 in 1997, represented the culmination of a series of JET enhancements—new fusion diagnostics, new T injection capabilities, refurbishment of the T plant, increased auxiliary heating, in-vessel calibration of 14 MeV neutron yield monitors—as well as significant advances in plasma theory and modelling in the fusion community. DTE2 was complemented by a sequence of isotope physics campaigns encompassing operation in pure tritium at high T-NBI power. Carefully conducted for safe operation with tritium, the new T and D–T experiments used 1 kg of T (vs 100 g in DTE1), yielding the most fusion reactor relevant D–T plasmas to date and expanding our understanding of isotopes and D–T mixture physics. Furthermore, since the JET T and DTE2 campaigns occurred almost 25 years after the last major D–T tokamak experiment, it was also a strategic goal of the European fusion programme to refresh operational experience of a nuclear tokamak to prepare staff for ITER operation. The key physics results of the JET T and DTE2 experiments, carried out within the EUROfusion JET1 work package, are reported in this paper. Progress in the technological exploitation of JET D–T operations, development and validation of nuclear codes, neutronic tools and techniques for ITER operations carried out by EUROfusion (started within the Horizon 2020 Framework Programme and continuing under the Horizon Europe FP) are reported in (Litaudon et al Nucl. Fusion accepted), while JET experience on T and D–T operations is presented in (King et al Nucl. Fusion submitted).

Fusion power

10.1088/1741-4326/ad3e16

Cite

Citations (19)

Investigation and plasma cleaning of first mirrors coated with relevant ITER contaminants: beryllium and tungsten

Nuclear Fusion (2017)

Lucas Moser R.P. Doerner M.J. Baldwin C.P. Lungu C. Poroşnicu

In order to extend the investigation of the plasma cleaning of ITER first mirrors, a set of molybdenum mirrors was coated in a laboratory with ITER-relevant contaminants, namely beryllium and tungsten. Different coating techniques as well as several contaminant compositions were used to ensure a large variety of films to clean, completing a previous study conducted on mirrors exposed in the JET ITER-like wall (tokamak deposits) [1]. Due to the toxicity of beryllium, the samples were treated in a vacuum chamber specially built for this purpose. The cleaning was performed using capacitively coupled RF plasma and evaluated by performing reflectivity measurements, scanning electron microscopy, x-ray photoelectron spectroscopy and ion beam analysis. The removal of all types of contaminants was achieved by using different plasma compositions (argon, helium and mixtures of the two) with various ion energies (from 200–600 eV) and in some cases the mirror's reflectivity was restored towards initial values. Pure helium discharges were capable of removing mixed beryllium/tungsten layers and oxidized molybdenum. In addition, no significant increase in the diffuse reflectivity of the mirrors was observed for the helium cleaning, though this was the case for some samples cleaned with argon. Helium is therefore appropriate for cleaning all mirrors in ITER leading to a possible cleaning regime where the entire vessel is filled with He and all mirrors are cleaned simultaneously without damaging their surfaces.

10.1088/1741-4326/aa73e2

Cite

Citations (20)

Testing of tungsten coatings in JET for the ITER-like wall

Journal of Nuclear Materials (2009)

J.P. Coad D.E. Hole Elīna Kolodinska J. Likonen S. Lindig

Limiter

Fusion power

10.1016/j.jnucmat.2009.01.260

Cite

Citations (8)

Material migration and fuel retention studies during the JET carbon divertor campaigns

Fusion Engineering and Design (2018)

J.P. Coad M. Rubel J. Likonen N. Bekris S. Brezinsek

The first divertor was installed in the JET machine between 1992 and 1994 and was operated with carbon tiles and then beryllium tiles in 1994–5. Post-mortem studies after these first experiments demonstrated that most of the impurities deposited in the divertor originate in the main chamber, and that asymmetric deposition patterns generally favouring the inner divertor region result from drift in the scrape-off layer. A new monolithic divertor structure was installed in 1996 which produced heavy deposition at shadowed areas in the inner divertor corner, which is where the majority of the tritium was trapped by co-deposition during the deuterium-tritium experiment in 1997. Different divertor geometries have been tested since such as the Gas-Box and High-Delta divertors; a principle objective has been to predict plasma behaviour, transport and tritium retention in ITER. Transport modelling experiments were carried out at the end of four campaigns by puffing 13C-labelled methane, and a range of diagnostics such as quartz-microbalance and rotating collectors have been installed to add time resolution to the post-mortem analyses. The study of material migration after D-D and D-T campaigns clearly revealed important consequences of fuel retention in the presence of carbon walls. They gave a strong impulse to make a fundamental change of wall materials. In 2010 the carbon divertor and wall tiles were removed and replaced with tiles with Be or W surfaces for the ITER-Like Wall Project.

Carbon fibers

10.1016/j.fusengdes.2018.10.002

Cite

Citations (28)

D retention and material defects probed using Raman microscopy in JET limiter samples and beryllium-based synthesized samples

Physica Scripta (2021)

C. Pardanaud Mohit Kumar P. Roubin C. Martin Y. Ferro

published or not.The documents may come from teaching and research institutions in France or abroad, or from public or private research centers.L'archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d'enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.D retention and material defects probed using Raman microscopy in JET limiter samples and beryllium-based synthesized samples C Pardanaud, M Kumar,

Limiter

Thermal desorption

10.1088/1402-4896/ac267b

Cite

Citations (2)